Z620 Z軸平台

　 Z620 Z軸平台

Z620 是一台完美解決灌注, 填充的系統. 可以設定z軸的高度從5.08-50.8mm. 也可以架在自動化生產線上.適用於各種膠體. 其他的功能包含傾斜功能,旋轉速度,點膠時間. 且可選擇針筒, 卡式膠筒, 膠閥應用.

　
Operation
The Z620 includes a sturdy work surface, to which a vertical guide rod is mounted. The z-axis adjustable pneumatic motion assembly is secured along the vertical rod. The tilting z-axis adjustment allows controlled dispensing on an angle. The Z620 dispenses adhesives, silicones, grease, urethanes and lubricants and is fully adjustable in speed and dispense time.
　
Dispense from barrels, cartridges or valves mounted on the z-axis gantry.


　
特性 
Consistent z-axis dispensing
Adjustable z-axis including tilt control
Stroke adjustment 0.20" (5.08mm) – 2.00" (50.8mm)
Simple to set up and operate
Automatic or manual operation


　

型號
Z620 auto-z dispenser 110/220V
DSP501A dispenser 110V
DSPE501A dispenser 220V CE


　

 　
　
規格
Power: Switchable 110V or 220V, 50/60 Hz
Stroke: 0.20" (5.08mm) – 2.00" (50mm)
Front to back
positioning: 0" – 1.75" (0 – 45mm)
Air input: 60 – 90 psi (4-6 bar)
Dispenser: DSP501A (not included)
Controller dimensions: 8.75" x 8.75" x 2.62"
(222x 222 x 67mm)
Auto-z unit dimensions: 11.75" x 11.75" x 19.50"
(258 x 258 x 495mm)
Weight: 22Lbs (10kg)